- Side-to-side positioning of the Clamp Screw is done by moving the Slide Block sideways on the Slide Bracket and securing it when the desired location is reached.
- Up-and-down positioning of the Clamp Screw is done by moving the Slide Bracket vertically until the desired position is reached and then securing it in place.
- Fore-aft positioning of the 3 Axis Slide Clamp in small increments is possible with the closely-spaced clearance hole pattern in the base. The length of movement in the Clamp Screw overlaps these increments, allowing ulimited range of clamping action.
- Material: Hardened alloy steel and ductile iron.