About Stevens System Accuracy Contact Us CAD  Library Product Search What's New
  Modular Fixturing System -   / Products / Accesories / Rest Pads 1

REST PADS

[ Standard | Hex | Flat Point | Cone Point | Round | Spherical | Small Toggle | Large Toggle | Serrated ]

STANDARD REST PADS/BASES
Used To Establish Height Locations Either Individually Or In Combination With Other Accessories.
  • 6 different shank lengths enables accurate setting of any height rest surface when used with Stevens Shims.
  • Threaded hole on top receives Stevens Rest Pads and Toggle Rest Pads in various shapes and sizes.
  • Height from shoulder to top surface (.1250 dimension) is precisely qualified.
  • Material: Alloy steel, case hardened to 60Rc.

PART NO.  
10222-1  

PART NO.  
10222-2  

PART NO.

  

10222-3

  

PART NO.

  

10222-4

  

PART NO.

  

10222-5

  

PART NO.

  

10222-6

  

 

APPLICATION

  • Rest pad bases may be used as secondary or tertiary locators by mounting against other qualified edges on Utility Blocks or Angle Plates.
  • Rest Pad Bases are used in combination with Shims  to establish desired qualified heights.
  • Greater qualified rest heights can be achieved by mounting Rest Pad Bases on Risers or Threaded Hole Risers.
  • Threaded hole in top of Rest Pad Bases allow use of smaller or specialized Rest Pads.
HEX REST PADS
  • Height from shoulder to top surface is precisely qualified.
  • Material: Alloy steel, case hardened to 60Rc.

PART NO.  
10224-1  

PART NO.

  

10223-1

  

PART NO.

  

10223-2

  

APPLICATION

  • Hex Rest Pad used with Rest Pad Base and Riser Base make a movable height locator.

FLAT POINT REST PADS
  • Height from shoulder to top surface is precisely qualified.
  • Useful where workpiece tooling points are small or have difficult access.
  • Material: Alloy steel, case hardened to 60Rc.

PART NO.  
10224-2  

PART NO.  
10224-3  

APPLICATION

CONE POINT REST PADS
  • Point is ground flat which contacts a small area on the workpiece.
  • Height from shoulder to top surface is precisely qualified.
  • Material: Alloy steel, case hardened to 60Rc.

PART NO.  
10224-4  

PART NO.  

10224-5

  

APPLICATION

Stevens Engineering, Inc., 3946 W. Clarendon Avenue, Phoenix, AZ 85019
1-(800)635-0657 or (602)272-6766 - FAX (602)272-0717

info@stevenseng.com

E-Mail Webmaster  ©2005 Stevens Engineering, Inc.