 |
|
 |
Modular Fixturing System -
/ Products / Accesories / Risers
|
|
RISERS
(HEIGHT LOCATORS)
| CORNER
RISERS |
| A
Compact Alternative To Parallels To Elevate A Mounting Surface.
|
- Screws and dowels to any Stevens
pattern.
- To locate Corner Riser, insert a
dowel pin through the top bushing, past a retaining ring, and
into a bushing location in the subplate below.
- Two captured screws secure the
Corner Riser, and are tightened by inserting an Allen wrench
through the threaded holes on top.
- Qualified height, may be stacked
for additional height.
- Material: Hardened ductile iron.
|
|
|
|
 |
| PART
NO. |
|
| 20136 |
|
|
APPLICATION
|
|
| THREADED
HOLE RISERS |
| Used For Elevating A
Threaded Hole - Rest Surface. |
- Height from shoulder to top is
qualified; may be used as a rest pad or in combination with
other rest pads and shims.
- Male thread on lower end fits
threaded holes in Stevens pattern.
|
 |
|
|
|
| PART
NO. |
|
| 10171-1 |
|
|
|
| PART
NO. |
|
| 10171-2 |
|
| BUSHED
HOLE RISERS |
| Used For Elevating A
Bushed Hole - Rest Surface. |
- Stem locks into bushings in Stevens
pattern; concentricity between the bushing in the top of the riser and
the stem is held closely, so there is no significant loss in location
accuracy.
- Height from shoulder to top surface is
qualified, bushed hole risers may be stacked for additional height.
- Material: Alloy steel, case hardened to
6ORc.
|
|
|
|
| PART
NO. |
|
| 20089-1 |
|
|
|
| PART
NO. |
|
| 20089-2 |
|
| STANDARD
RISERS |
| Used For Elevating
Rest Pads Or Clamping Assemblies. |
- Screws to any Stevens pattern.
- Two captured screws secure the riser,
and are tightened by inserting an Allen wrench through the threaded
holes on top.
- Qualified height, may be stacked for
additional height.
- Material: Alloy steel, case hardened to
60Rc.
|
|
|
 |
| PART
NO. |
|
| 20097-1 |
|
|
 |
 |
| PART
NO. |
|
| 20097-2 |
|
|
APPLICATIONS
|
|
|
| RISER
BASES |
| Used For Positioning Risers Or Other Accessories. |
- Slot enables positioning anywhere
needed.
- Qualified height
- May also be used as Adjustable
Rest Pad Base.
- Material: Alloy steel, case
hardened to 60Rc
|
|
 |
 |
| PART
NO. |
|
| 10191 |
|
|
| |
|
Stevens Engineering, Inc., 3946 W. Clarendon Avenue, Phoenix, AZ 85019
1-(800)635-0657 or (602)272-6766 - FAX
(602)272-0717
info@stevenseng.com
|
|
E-Mail Webmaster
©2005 Stevens Engineering, Inc. |
|
|
