 |
|
 |
Modular Fixturing System -
/ Products / Accesories / Work Supports
|
|
WORK
SUPPORTS
|
LOCKING
SUPPORT |
| Used
To Support Workpieces In Places Where Cutting Forces Could Cause
Deflection, Vibration, & Chatter.
|
- Will support up to 1,500 Ibs.;
plunger stroke is .44”.
- The plunger is positioned directly
under the point needing support. Light spring pressure brings
the plunger in contact with the workpiece. The plunger is
clamped using a wrench on the clamp rod.
- Unique locking mechanism improves
load-bearing capacity.
- The work support may be elevated
using other components. When elevated, the end containing the
plunger should be fully supported.
- Material: Hardened alloy steel.
|
|
|
 |
 |
| PART
NO. |
|
| 20104 |
|
|
APPLICATION
|
|
|
LOCKING
SUPPORT W/ THREADED HOLE IN PLUNGER |
| Used
In Combination With Rest Pads & Other Components To Resist
Deflection Of Workpieces Under Cutting Pressure.
|
- Will support up to 3,000 Ibs;
plunger stroke is .50”.
- The plunger is positioned directly
under the point where support is needed.
- Spring pressure brings the plunger
in contact with the workpiece. The plunger is locked by
tightening the clamp screw. Unique locking mechanism improves
load-bearing capacity.
- Virtually any height or size of
rest surface can be created by using the range of available
accessories—Rest Pad Bases,
Toggle Rest
Pads, Shims, or
Studs.
- Material: Hardened alloy steel.
|
|
|
 |
 |
| PART
NO. |
|
| 20161 |
|
|
APPLICATION |
|
| |
|
Stevens Engineering, Inc., 3946 W. Clarendon Avenue, Phoenix, AZ 85019
1-(800)635-0657 or (602)272-6766 - FAX
(602)272-0717
info@stevenseng.com
|
|
E-Mail Webmaster
©2005 Stevens Engineering, Inc. |
|
|
