| Stevens Engineering offers NEW CONCEPTS in Workholding |
| |
MODEL
626 MODULAR VISE is
an updated version of our Model 625 Modular Vise featuring
-
Lower profile design for more tool clearance.
-
Fixed and Moveable jaws now accept industry standard 6" wide jaws which are readily available from multiple vendors.
-
Uses pull dowels for positioning both fixed and movable jaw
assemblies.
-
The two-piece
design permits separating the fixed and movable jaw assemblies
to accommodate large workpieces.
-
Multiple vises can be lined up in a row to allow clamping of long workpieces without the need for tedious alignment and indicating.
 |
| MICRO JACK is used to raise or lower a workpiece to the desired level
prior to machining. The worm and worm gear mechanism
allows fine height adjustment. It will easily support up
to 5000 lbs. A variety of STEVENS rest pads may be
threaded into the plunger. |
 |
 |
|
| EQUALIZER CLAMPS are
non-influencing, capable of grasping thin flimsy work without
deflection or distortion and holding them firmly during
machining operations. Equalizer clamps are also used to
hold parts of up to 1" thickness in positions away from the
preferred locating points. This is extremely useful in
situations where it is not practical to clamp directly over rest
pad locations. |
 |
 |
 |
 |
| |
|
|
| CHAIN
CLAMP a compact, powerful
work-holder for round parts with new protective nylon shoes
inserted into alternate links as shown, hold round parts firmly
for machining without scratching the finished surfaces they
contact. |
|
 |
 |
 |
 |
|
| Conventional clamping localizes clamping force and may distort
workpieces.
The STEVENS Chain Clamp distributes clamping forces, reducing workpiece
distortion. |
 |
